Fast speed injection molding machine 680ton

Fast speed injection molding machine 680ton

1.) High Precise Control The servo system can control the machine's pressure, speed & location precisely, make sure that the error of accurate repeatability precision for the shot measurement is <0.3%

2.) High sensitive response Because the motor vector is matched with the controller accurately, it only takes 0.5sec. inputing the number from 0 to max. Compared with other traditional hydraulic injection molding machine, HJS series is more faster in speed with shorter cycle time and high efficient in production

3.) Low noise Compared with traditional fixed pump & variable pump system, the noise is 1/10 lower under normal circumstance, more suitable for sealed dustless workshop

4.) Energy Saving Overall efficiency is 10% more & driving capacity is 18% more than common machine. This series can save 40-80% energy, and achieve first-class energy efficency

5.) Water cooling saving The system condition prevent high pressure uploading without any power output, leads to the water cooling saving

		BN-680
INJECTION PART PARTE INYECCIÓN	UNIT	A	B	C
Screw diameter Diámetro del tornillo	mm	90	95	100
Screw L/D ratio Tasa L/D del tornillo	L/D	20.4	19.4	18.4
Shot volume Volumen de Inyección	cm3	2543	2834	3140
Injection weight(PS) Peso de la inyección	g	2314	2579	2857
	oz	81.6	90.9	100.8
Injection rate Tasa de inyección	cm3/ s	522.6	582.3	645.2
Injection pressure Presión de inyección	Mpa	183.7	164.9	148.8
Screw speed Velocidad del tornillo	rpm	140
CLAMPING PART PARTE DE CIERRE
Clamping force Fuerza de cierre	kN	6800
Opening stroke Apertura	mm	900
Space between tie bars Espacio entre barras	mm	925x875
Mould thickness Espesor de molde	mm	330~900
Ejector stroke Carrera del expulsor	mm	335
Ejector force Fuerza del expulsor	kN	150
OTHERS Otros
Oil pump pressure Presión de la bomba de aceite	Mpa	16
Oil pump motor power Potencia del motor de la bomba de aceite	kW	30+37
Heater power Potencia del calefactor	kW	42
Machine dimension Dimensión de la máquina	m	9x2.1x2.6
Oil tank capacity Capacidad del tanque de aceite	L	1020
Machine Weight Peso de la máquina	t	28

Contact us if you need more details on Fast Food Containers Injection Molding. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Fast Speed Injection Machine、Thin Wall Injection Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : High Speed Injection Molding Machine